Product Features
The Eaton PSFi is designed for IEC, Class III, plug in surge power board for domestic, SOHO and light industrial environments. 10A and 16A IEC in / out, rugged case, dual mode filter and 3 mode surge protection.
The Eaton PSFi’s Features Include:
- Surge suppression & filtering in a single package
- Small footprint, modular design
- Enclosed in rugged metal housing
- Surge suppression rating 40kA all modes
- Protection Fail Indicators
- 3 mode, 3 Stage Protection
- 12 Month Warranty
The Eaton PSFI is designed to provide secondary protection against power surges caused by external sources such as lightning strikes & substation switching, as well as providing a measure of protection from surge events generated on the secondary side of the filter. The unit has been designed in accordance with AS3100, AS1768, IEC61643-1, IEC61000-6-1, 2, 3, 4 & other standards & codes as applicable.
The Eaton PSFI is a 3-stage protection unit utilising primary & secondary MOV protection in conjunction with a Low-Q LC filter. The unit provides filtering of the line harmonics, noise & RF transmitters with a cut-off frequency of <10kHz & a minimum attenuation of 40dB above 1Mhz. The operation status of the PSFI is indicated by lamps on the front panel. The “OK” light indicates that power is applied to the PSFI. The “FAULT” light indicates that the surge protection circuitry is damaged & the unit should be replaced. An ideal device for Category A locations.
For further information …. please phone Power On Australia on 1300 66 24 35 – OR – complete the enquiry form on this page
